How to install a printer without a disk: instruction

A quick way to install a printer without a disk

Usually, for the printer's correct operation, you must download the driver from a special installation disk, which is supplied with the printing device itself. But if it is necessary to connect the printer or the MFP of this very installation disk, it may not be at hand. And often it often happens that the driver was developed under Windows XP and on Windows 8 it simply does not work.

If you cannot install the Canon 810 printer from the original disk, you can always make it manually: the way it is simple and accessible to everyone.

Instructions for installing a printer without a disk

Fashion first

  1. Turn on the computer and wait until the operating system is full.
  2. Connect the printer or MFP to the computer via the USB cable.
  3. Go to the computer menu by clicking the Start button.
  4. Open the Control Panel.
  5. Select the "Devices and Printers" or "Print Devices" section (depending on the operating system). Installation Instructions
  6. Click on "Adding Printer" or "Installing Printer": Algorithm for installing printer

For Mac OS X, go to the Apple menu and click System Settings. Select "Printing and Fax" and click on the "+" icon. To start the installation process, select a new printer from the list.

  1. Next begins the process of installing the printer. In the "Printer Installation" window that opens, the system displays the printers available to the installation.

For instance:

  • Canon MG2440.
  • Samsung SCX 3400.
  • Canon LBP 810.
  • Epson L355
  • Canon MF3010.
  • Canon LBP3010B.

Select the desired printer and click Next.

  1. If there is no required device in the displayed list, let's say you need to install HP Deskjet, then you must manually select the connection method.
  2. To do this, click "The desired printer is missing in the list": Click Next

Next, you should find a printer for other parameters. For example, you can select a printer by name, speaking manually path to it. Either you need to add a network device over the IP address or connect the HP Deskjet wireless connection to WiFi and Bluetuth. Select the desired item

Use electrical appliances just as before, and pay 2 times less!

You can pay for light by 30-50% less depending on what exactly the electrical devices do you use.

Read more >>

  1. You can also add a local or network printer with manually settings. Select the printer port and click Next. In the "Manufacturer" column, specify the manufacturer: Xerox, Epson, Brother, HP, etc. And from the list "Printers" choose your model: Mg2440, SCX 3400, LBP 810, L355, MF3010, etc. We find a printer in the list.
  2. Click "Next" and set the printer name, for example, LBP 810. Enter the printer name
  3. Click "Next" again and wait for the installation.
  4. To check the installation correctness, select "Print Page Printing". After the installation is complete, click Finish.

Method of the second

If the printing device fails to be connected via a computer control panel, you can use an alternative method and download the driver from the technical support page of the printer manufacturer on the Internet.

Before installing a printer without a disc, it is necessary to find out the exact device model, as well as the version and bit (in the bits) of the computer operating system. The brand and model are indicated on the front panel of the printer itself, for example, Canon LBP 810 or Samsung SCX 3400, etc.

The battery is learning clicking on the "Computer" icon with the right mouse button and choosing the item "Properties".

Set up parameters

Deciding with outgoing parameters, looking for drivers on the manufacturer's official website:

Download the driver on the computer from the official site is also beneficial and because the setting through the operating system provides only the basic functionality necessary for the printing process, while installing the extended version from the manufacturer allows the correct setup also to the scanning program.

On the Printer Manufacturer's website in the Support section, you must find a specific HP Deskjet or SCX model and download the appropriate driver version by clicking on the diskette. Usually the driver on the computer is loaded as an archive file, which must be unzipped before installation. Perhaps, after unzipping, multiple files of different types will appear in the folder. Among them, by name, you need to find exactly the driver that suits your operating system. Such a file will have an extension * .exe (for example, for MFP I-SENSYS MF3010 when installing on a computer with 32-bit Windows 8, the driver is called MF3010MFDRIVERSV2095W32EN.EXE).

Download Driver

Opening the desired file, the program installation window will appear on the computer.

Some printer models may need to disconnect Samsung SCX from a computer to correct software configuration. Next, you can safely follow the prompts and, after a few minutes, the driver will be installed.

Below is a cognitive video on the topic:

Posted by: Irina B

How to connect a printer to a laptop?

Consider all actions in more detail.

Connecting printer

Installing a wired printer begins with its connection to a power source, as well as to a laptop or computer. For these purposes, the device is completed with two corresponding cables. By installing a connection to the computer via the USB port, the printer should be turned on by pressing the power button on the housing.

In most cases, Windows automatically defines a new device in the system and sets the necessary software to work with it. However, if this did not happen, the owner of the laptop or PC should be performed following:

In Windows 10:

Open the Start menu, go to "Parameters" and select the Device Section.

Click on the "Printers and Scanners" string, click the Add Printer or Scanner button.

Wait until the computer completes the search, and select the appropriate option from the proposed list. If the laptop cannot detect the printing device, you need to click "Update" or "The required printer is missing in the list" and follow the further instructions of the system.

In Windows 7 and 8:

Find in the Start menu section "Devices and Printers".

Press the "Install Printer" button. Click on the "Add Local Printer" option in the manager that opens.

On the "Select Printer Port" page, click "Use Existing and Recommended".

Installation of drivers

For the correct operation of the print device, drivers are required. Usually they are contained on the disk, which, together with cables, is attached to the printer when buying. To install the drivers, you need to place the media into your laptop drive and wait for automatic startup. If the disk does not open itself, it should be done manually through the "My Computer", by clicking on the drive driver twice.

The installation program is started through the file "setup.exe", "install.exe" or "autorun.exe". Its interface is different from different manufacturers of printers, however, the general structure in most cases remains unchanged - the computer owner must carefully follow the instructions of the system to install the drivers. The program will ask to agree with the terms of use, select the printer connection method, specify the folder to install the files.

Setting up printing

After successfully connecting the printer to the laptop, it remains to configure printing. This procedure is carried out through the computer control panel. From the user you need:

Log in to "Control Panel" and select the category "Devices and Printers".

Find the name of your office equipment in the list, click on it right-click and click "Print Setup".

In the window that opens, set the appropriate parameters: paper size, pages orientation, number of copies, image quality, paper source, etc. Press the "Apply" button to take effect. The specified settings will be used when printing documents from a laptop.

Installing a driver from another printer

Consider using the example of Windows 7 64-bit and the Xerox Phaser 3116 printer.

On the site the manufacturer for this system is not. You can try from Xerox Phaser 3117.

  1. Download the driver for Phaser 3117 and unpack it.
  2. Connect the device to the computer.
  3. Open the start in the search field write "Device Manager". Run it.
  4. Right-click on the unknown device / printer, call the context menu, and select "Update Drivers ...".
  5. Survey the driver of the drivers is this computer.
  6. Select the driver from the list of already installed drivers.
  7. Select "Printers" and "Next".
  8. We click "Install from the disk ...".
  9. We specify the XRXB7.INF file in the unpacked folder.

How to install a canon printer without a disk

Home / Useful trifles / installation of a printer without a disk: correct search for the required driver

11/09/2015 Useful little things 0

You figured out how to install a printer, but there is no disk with drivers on your hands? Or did you understand how to connect the printer to the laptop, but the laptop does not have a drive to insert a media with software? Situations may be different, but combines their one problem - the need to install drivers to the printer without a disk.

How to find out what driver is needed?

In order for the connected equipment to work correctly, you need to find suitable drivers. To successfully perform this task you need to know:

  • Printer model.
  • The version and the discharge of the operating system.
  1. Click on the "Computer" right-click.
  2. Open "Properties".
  3. Look at the type of system and publication. Knowing these parameters, you can download drivers on the manufacturer's website for printing device. If you have a Canon printer - come to the site canon.ru and go to the "Support" section. For HP LaserJet Drivers can be found on HP.com, etc.

Download drivers

To quickly download Windows 7 drivers for a printer from the official site, use the search by the model. Take for example canon driver:

  1. Go to the manufacturer's website.
  2. Go to the "Support" section - "for individual users."
  3. Click "See all products".
  4. Enter the exact printer model in the search bar to find and download the installation disk.

A smart search will find the necessary software and automatically define your operating system. Suppose you need drivers for Windows 7 - check that not only the version has matched, but also the bit (32 or 64 bits), and then click "Download". For HP drivers are located and downloaded in a similar way, as for the printers of other brands, Epson, Brother, etc..

ID equipment

If you do not want to search for drivers on the official website (or for some reason you need there), you can use in a different way:

  1. Click on the "Computer" right-click.
  2. Open the Management Tool.
  3. Go to "Device Manager".
  4. Right-click the printer, which you connected.
  5. Click the Information tab.
  6. Open an "hardware ID".
  7. Copy the first value (if anything is found on this code, try the second one).
  8. Insert it in the search bar on Devid.info.

Select the appropriate version of the driver (according to the system) and click on the diskette to download the software.

Note: Equipment IDs must decide even if the device is not completely identified by the system. Simply put, if the installation of the printer is made, you can recognize its code without any problems through the device manager.

Installing software

Drivers are downloaded in the form of an installation package with * .exe extension. If you had an installation disk, then inside it you would find exactly the same file. Accordingly, the order of installation does not change either:

  1. Run the downloaded installation file, usually setup.exe.
  2. Using the Installation Wizard, go through all the steps.
  3. Restart the computer (if the wizard suggests this).

After rebooting, go to the "Devices and Printers" section to make sure that the printer is correctly detected by the system and is used by default.

Update centre

You can try to install the printer through the Windows Update Center. There is nothing difficult here:

  1. Disconnect the printer from the computer.
  2. Open the "Devices and Printers" section.
  3. Click on the Installation button.
  4. Select "Add Local".
  5. Put the port without changes.
  6. Click the Update Center button.
  7. Wait until the available drivers are downloaded, and select software for your model (or at least a series).
  8. Leave the printer name unchanged and wait until it is installed. Common access is not needed.

After installation, you will appear in the "Devices and Printers" section of the added equipment icon. Click on it right-click and select "Delete". After that, connect the printer and wait until it "grab" installed previously installed software.

You can repair or firmware your printer in Simferopol in our service center on the street. Dzhubanova 3. Please contact at working hours from 9.00-18.00 by number +7978 764 75 85

Save

Save

How to install a printer without a disk: instruction

Usually, for the printer's correct operation, you must download the driver from a special installation disk, which is supplied with the printing device itself. But if it is necessary to connect the printer or the MFP of this very installation disk, it may not be at hand. And often it often happens that the driver was developed under Windows XP and on Windows 8 it simply does not work.

If you cannot install the Canon 810 printer from the original disk, you can always make it manually: the way it is simple and accessible to everyone.

Fashion first

  1. Turn on the computer and wait until the operating system is full.
  2. Connect the printer or MFP to the computer via the USB cable.
  3. Go to the computer menu by clicking the Start button.
  4. Open the Control Panel.
  5. Select the "Devices and Printers" or "Print Devices" section (depending on the operating system).
  6. Click on "Adding Printer" or "Installing Printer":
  1. Next begins the process of installing the printer.

    In the "Printer Installation" window that opens, the system displays the printers available to the installation.

For instance:

  • Canon MG2440.
  • Samsung SCX 3400.
  • Canon LBP 810.
  • Epson L355
  • Canon MF3010.
  • Canon LBP3010B.

Select the desired printer and click Next.

  1. If there is no required device in the displayed list, let's say you need to install HP Deskjet, then you must manually select the connection method.
  2. To do this, click "The desired printer is missing in the list":

Next, you should find a printer for other parameters. For example, you can select a printer by name, speaking manually path to it. Either you need to add a network device over the IP address or connect the HP Deskjet wireless connection to WiFi and Bluetuth.

Use electrical appliances just as before, and pay 2 times less!

You can pay for light by 30-50% less depending on what exactly the electrical devices do you use.

Read more >>

  1. You can also add a local or network printer with manually settings. Select the printer port and click Next. In the "Manufacturer" column, specify the manufacturer: Xerox, Epson, Brother, HP, etc. And from the list of "Printers" choose your model: Mg2440, SCX 3400, LBP 810, L355, MF3010, etc.
  2. Click "Next" and set the printer name, for example, LBP 810.
  3. Click "Next" again and wait for the installation.
  4. To check the installation correctness, select "Print Page Printing". After the installation is complete, click Finish.

Method of the second

If the printing device fails to be connected via a computer control panel, you can use an alternative method and download the driver from the technical support page of the printer manufacturer on the Internet.

Before installing a printer without a disc, it is necessary to find out the exact device model, as well as the version and bit (in the bits) of the computer operating system. The brand and model are indicated on the front panel of the printer itself, for example, Canon LBP 810 or Samsung SCX 3400, etc.

The battery is learning clicking on the "Computer" icon with the right mouse button and choosing the item "Properties".

Download the driver on the computer from the official site is also beneficial and because the setting through the operating system provides only the basic functionality necessary for the printing process, while installing the extended version from the manufacturer allows the correct setup also to the scanning program.

On the Printer Manufacturer's website in the Support section, you must find a specific HP Deskjet or SCX model and download the appropriate driver version by clicking on the diskette. Usually the driver on the computer is loaded as an archive file, which must be unzipped before installation.

Perhaps, after unzipping, multiple files of different types will appear in the folder. Among them, by name, you need to find exactly the driver that suits your operating system. Such a file will have an extension *.

Opening the desired file, the program installation window will appear on the computer.

Some printer models may need to disconnect Samsung SCX from a computer to correct software configuration. Next, you can safely follow the prompts and, after a few minutes, the driver will be installed.

Below is a cognitive video on the topic:

Irina B.

How to install a printer without installation disk on a laptop

Hello, dear readers of my blog. If you have problems with the installation of the printer. Did it happen that it was necessary to urgently install the printer, and the installation disk did not turn out to be at hand? Then here are you some tips, how to install a printer without an installation disk.

Most people believe that for the installation of the printer, you must need a CD. But it is not. You can easily and simply install your printing device with both disk and without it. There are two ways to install the printer without the installation disk, here they are:

Fashion first

  1. Click the Start button.

In Windows XP, in the window that opens, click "Control Panel" and select "Printers and other equipment" or "Printers and Faxes".

In Windows Vista or Windows 7, select "Printers" or "Devices and Printers" from the right side of the Start menu.

Click the Printer Setup button.

In Windows XP, it is in the "Print Tasks" column. The "Printer Wizard" opens.

In the case of Windows Vista or Windows 7, the "Printer Setup" button is on the toolbar. The "Install Printer" window opens.

Click "Next" to start the wizard in Windows XP.

In all operating systems, select "Add Local Printer" if you install the printer that is connected directly to the computer.

Or select "Add Network Printer" to add a printer connected to your home or office network.

Windows Vista and Windows 7 also also provides for the possibility of connecting a wireless connection of the printer with a computer via WiFi network or using Bluetuth.

Select the printer connection port in the drop-down menu (most likely it will be USB001). Click "Next". Specify the printer manufacturer in the manufacturer list. Select the printer model in the Printers list. Press "Next".

In the next window, enter the printer name invented by you or leave the printer name specified by default. Click "Next". Windows will install a printer to your computer.

To check the performance in the window that opens, click the "Print Page Print" button. Upon completion, click Finish. Installing the printer is completed.

Method of the second

If you do not have a disk with drivers for the printer, do not worry, just go to the manufacturer's website (HP, Dell, Epson, Canon, etc.).

Go to the support page where all the drivers are laid out for the production of this company. The addresses of these pages for some manufacturers I posted at the end of the article.

Find and download drivers for your printer model, pay attention to their compatibility with your operating system. Usually the downloaded file is an archive

Unzip it

Usually the downloaded file is an archive. Unzip it.

If, as a result of unzipping, you received a folder with files of different types - find and run the Setup file. If downloaded drivers are one or more executable (extension .exe) files, run the one that is most suitable for your operating system (usually the OS type is specified in the file name, for example: dell_aay_Vista_x64_ps_sys_en).

Follow the instructions in the installation program window, and after a few minutes the printer drivers will be successfully installed in your operating system. Note that for some models it is necessary that the printer is disabled in the installation of drivers.

Using one of these ways, you can independently install the printer without the installation disk. Here is the addresses of support pages on the sites of some printer manufacturers, where you can find and download the drivers you need:

  • Brother http://welcome.solutions.brother.com/bsc/public/countrytop.aspx?reg=eu&c=ru&lang=ru.
  • Canon http://software.canon-europe.com/
  • Dell http://www.dell.com/support/drivers/ru/ruudhs1/productselector/select?rquery=fkey-e-drivers_ps.
  • Epson http://support.epson.ru/
  • Hp http://h20025.www1.hp.com/ewfrf/wc/sitehome?lc=ru&dlc=ru&cc=ru&lang=ru&product=TOP.
  • Lexmark http://support.lexmark.com/index?page=ProductSelection&channel=supportanddownloads&locale=ru&userlocale=ru_ru.
  • Samsung http://www.samsung.com/ru/support/downloaddmain.do
  • Xerox.

ACTIONTEASER.RU - teaser advertising

Can I connect MFP to a laptop without a disk?

You will need:

  • Wi-Fi access point
  • Connection cable
  • Internet access

#one

And in principle, even the most inexperienced user will be able to cope with the task without much difficulty, because in order to insert the installation disk into the drive and perform the simplest installation operations, after connecting the device with a PC with a cord, there is nothing complicated.

# 2.

After a safe unpacking and installing files, go to the "Devices and Printers" submenu in the "Control Panel" of the computer's operating system, where the new device shortcut will be displayed and, if everything was done correctly, you can safely begin to work and configure the MFP itself. . There are few more simple ways to connect MFP to a laptop, and one of them is the connection and setting up with a PC via a Wi-Fi-point. And first of all, the non-configured device should be connected to a laptop using a USB cord included for these purposes. The next stage involves the creation and configuration of the new access point directly for the most multifunction device, after which it is necessary to make it connect to Wi-Fi. Next, you need to install the drivers, acting on the proposed scheme or using the original installation disk.

# 3.

As for the configuration of the most multifunctional device after connecting to a personal computer, it also does not constitute anything complicated. To do this, in the "Settings" menu at the MFP itself, it is necessary to consent to connect the device to the Wi-Fi-point.

Then it is recommended to go to the "Fast Setup" submenu in order to enter the network key, after the MFP detects it. If everything was done correctly, the light bulb on the device panel should catch up with green or blue, after which you can start work.

Connecting MFP to a stationary computer at least with a disk, even without it, will also not be much difficulty and the first thing to do is to download drivers for this model.

#four

After connecting the MFP to the PC using a USB cord in the lower corner of the monitor, the cherished "new device has been found". By clicking on this window, you can automatically go to the "Wizard", where step by step instructions will be shown to configure the new equipment.

After completing the setting, you need to go to the "Start" menu by selecting the "Devices and Printers" submenu in the tab that opens. Check the success of the connection more than easy, because if everything was done correctly, then in the window that opens will be displayed all MFP labels (and printer, and scanner, and fax).

The lack of labels indicates that the connection has not been fulfilled and the causes of malfunctions should be sought.

#five

In any case, this is not a problem at all, because to eliminate the problem just just download the latest version of the installer from the manufacturer's official website and restart the device itself.

The lack of shortcuts into the "Device and Printer" submenu can be caused by a more primitive problem - the lack of a PC connection to the MFP, which most often happens when the user forgets to connect the USB cord, turn on the equipment itself into the network or activate its power button.

# 6.

After successful installation and connection, you must check the print quality, for which it is recommended to select the "Properties" submenu in the window that appears after one click on the printer shortcut.

In the same way, the scanner and fax work is inspected.

How to connect a printer with a laptop

Via usb.

Laptop, like any other personal computer, can be connected to the printer with a regular USB cord. This type of connection is supported by everything without exception of the printing technology model. And the entrance itself is accurately present on the portable "device". The main thing is to coincide the versions of the interfaces used. If Yusb 1.0 is no longer found, then 2.0 and 3.0 at the peak of popularity.

When the connection is set, you need to wait a bit until you hear the beep. After some time, the software will be automatically installed the Windows operating system itself and you can go to the print setting section. If this happens, the drivers will have to be installed manually. There is nothing complicated in this and easy to do even without the installation disk.

Wi-Hi

WPS is decrypted as Wi-Hi Protected Setup, which means "Protected Wi-Fi Setting". To take advantage of this technology, it must be supported by a router and the printer itself. The presence of Wi-Hi on a laptop is not questioned, since the models without it does not exist in nature.

We produce connection according to such a scheme:

  1. We are looking for the WPS button on the router housing. As a rule, it is placed on the reverse side in most cases.
  2. Within two minutes, activate the same button on the printing device.
  3. We are waiting for the end of creating a connection between devices.
  4. If the laptop is in the same Wi-HI network, there should not be problems with printing.
  5. Connect to the printer as to the network.

If the WPS buttons are not found on the modem case or turn on it does not work, I will try to do it through the router control web interface. In most cases, to enter it in its settings, you need to enter the address in IP format 192.168.0.1 in any browser or try 192.168.1.1. Enter the "Admin" login and the same password if it has not changed. In the settings, find the "Wireless" section, and in its subsections, turn off the Mac filtering and turn on the WPS function.

Manual setting

If the automatic installation of the connection described in the subsection above is not possible on your models of technology, then the Wi-Fi connection can be done by hand. All that is required to configure it know the name of the network and access code. Such data may be indicated on the modem lid or in the documents from the company's Internet service provider.

Manual setting order:

  1. We go to the menu on the printer screen.
  2. We enter the network settings.
  3. Select the Wihi section.
  4. Specify the network name and password SS> network connection

Regardlessly, a printer was connected to a Wi-Hi network, as described above, through another PC or directly patch cord into the Ethernet socket, now it is necessary to connect to it and install special software (driver) to work properly. Connect the connection in several ways.

  1. Find the printing device via the network. To do this, open the "my computer", on the left below we find the "Network" label. If the printer is connected directly to the network (via Wi-Fi or patch cord), then click on the label, and if through another network PC, then the triangle reveal the list. Through the right key and the context menu, we make a connection, agree to the installation of drivers.

Connect the printer to the laptop or computer can be via a USB cable, a power cord or with Wi-Fi. At the same time, the user may encounter problems associated with the lack of necessary drivers or some kind of problems in the system. The main points of the connection that you need to do when the problem is detected - it is described below.

What will be needed for connecting

Printer connection with laptop

Before connecting the printer to the laptop, you must first prepare. What first needs to be done:

  • Check for working USB ports on the device. In any case, the device will need to be connected to a stationary computer or laptop.
  • Find a place where you can place a printed device.
  • Take care of drivers.

The last item is not always mandatory, since modern devices along with the Internet connected often install the necessary drivers after the connection. However, the manufacturers usually invest and the necessary programs for work.

Connection procedure via USB

Many users have a solution to the issue how to connect the printer to a computer does not cause special difficulties. The procedure is quite simple and for all printer models will be approximately identical.

Connecting a printer on cable

Connection is carried out in this order:

  1. A USB cable is taken into the working port on a computer or laptop.
  2. The other end of the cable must be inserted into the appropriate connector in the printer.
  3. The second wire is inserted into the socket.
  4. Next, you should enable the printer using the start button, which may be both on the front and the rear panel.

Connect the printed device is not only through the cable, but also by Wi-Fi connection. This option is most convenient when using laptops. However, it should be borne in mind that at the same time the device will still need to be connected to another PC on the cord.

Note! After completing the connection of the two devices, it is recommended to look at the PC monitor or laptop. If everything is done correctly, a message should appear in the lower right corner that new equipment has been found.

Connection via cable

Installation of drivers

As already mentioned, if there is an Internet driver connection, the driver can be installed and automatically (Windows is smart enough). Another option if the device is new, the installation disk with all the necessary applications is included with it. How to work with him:

  1. Check for a printer connection with a computer and a network.
  2. Insert the disk into the drive.
  3. Open the "My Computer" section on the laptop.
  4. In the pop-up window, double-click the image of the drive.
  5. Or the program will start, or the disk itself will open. In the latter case, in the list presented, you must select the installation file. Usually it is denoted by the word "setup".
  6. Wait until the installation is completed.

Setting up printing

After all previous procedures are successfully completed, it is recommended to go to the settings. Detailed description, how to configure the device:

  1. Select the Start menu.
  2. Next section with devices.
  3. In the list presented, find the installed device.
  4. Click on the image of the right key.
  5. Select "Print Setup".
  6. A menu appears in which the user may at its discretion edit the settings, for example, set the brightness of the displayed images and texts.

Options exactly exactly how to change the settings, quite a lot. Here is the list of recommended:

  • Changing page orientation. You can put a book or landscape option.
  • Change the size of the output sheets. Standard A4.
  • Put alternation, print text on both sides.
Device setup

Trial print

Make sure that the device works correctly using the "Test Print" function. How this procedure is performed:

  1. Through the Start menu, you need to open the "Devices and Printers" section.
  2. Select installed and click on it with right-click.
  3. Function "Properties".
  4. In the "General" section at the bottom of the screen, there is a "trial print" button.
  5. You must click on it and the printing device will earn, the release page.

Connection in the absence of an installation disk

If Windows fails to connect to the printer using an automatic system, and there is no drivers with drivers, you can use other ways. For example, find the necessary programs on the device manufacturer's website. The user needs to specify the model in the search engine, select it and download the driver.

Note! The connection method using programs is good in that in free, and most importantly, free access is all the necessary utilities even for old models of devices.

The second option - using the update programs from the Windows system itself:

  1. Enter the device through the control section.
  2. Expand the point with printed devices.
  3. In the list presented to find the desired model.
  4. Click on the desired device with the right key and select the "Update Drivers" item.
  5. Next subparagraph "Automatic update".
Update Driver

Why the laptop does not see the printer via USB

There are situations when the laptop does not see the printer via USB or on a local network. As a rule, the reasons may be as follows:

  • Cable is damaged or poorly inserted.
  • Wrong drivers installed.
  • By default, the system chose another device.
  • The print service is not launched on Windows.

Important! Most of the problems presented are solved quite easily. Also, if problems arise using, it is recommended to simply reboot the PC and the printed device itself.

What to do if you can not connect to the printer

As already mentioned, it is quite simple to solve the problem with printing. First of all, it is recommended to check the condition of the cable, whether it dismissed, and there is no damage. In the latter case, the cord is most likely to be replaced.

In addition, it is necessary to move from the control panel to "Print Devices" and verify that the default system is indicated in the system. This is especially true if different models of printers were installed on a PC or laptop.

Determine the one that is used is simple enough, there should be a mark in the form of a check mark next to it. If this is not necessary, you just need to right-click on the attached object and secure the specified function behind it.

Writes: denied access

If Windows fails to connect to the printer and it is written, which is denied access, it means that the device is connected over the network and it is not used on the main computer. In this case, the problem must be sought in that PC, which is connected to the printing device over the cable. It is possible that it is simply turned off or flew by the driver due to malicious programs.

As can be understood, everything is simple enough. Most actions are performed by the system automatically, and problems are easily solved. If you could not configure the printer, it is recommended to contact a specialist.

How to connect the printer to a laptop without installation disk

How to connect a printer to a laptop without an installation disk (or with it), which stages are worth passing, can the difficulties arise? We will understand these issues in this publication. Consider simple instructions and ways to eliminate possible problems.

Canon Printer.

Modern technologies

If earlier printing devices could only be found in offices or institutions providing scanning / copying / printing services, now almost every computer user has a printer or MFP.

Such devices have a lot of varieties relating to print quality (differ in DPI), the type of cartridges, the method of applying paper (using ink, powder, point shocks of the plotter), the presence of additional connection interfaces, convenient controls, screen, etc.

Every day, wireless devices connected with PCs, smartphones via WiFi or Bluetooth are becoming increasingly popular. Very good option when you want to get rid of wires. But so far such devices refer to premium segment, and not everyone is ready to overpay for this functionality.

Therefore, in the instructions, make an emphasis on a more familiar and common wired connection with a laptop or stationary PC.

Coupling with electric grid

Obviously, a separate power is necessary for the printer, since the USB does not provide the device with the desired voltage. The kit must necessarily be the cable, one end of which insert into the printer (the connector is located behind), and the other in the outlet. It is better to use a network filter or stabilizer to protect the technique from damage during a thunderstorm or voltage drops.

Power Connection Cable

In new models, there may be an external power supply and connector more compact. But the point does not change.

I am sure that the first step does not cause you any difficulty. The only moment with which many faces is the presence of an additional switch-on button hidden somewhere from behind.

Therefore, if immediately after connecting to the power source, the indicators do not light up, the device does not give signs of life - we look at the front panel, looking for a key with a similar designation:

Button on in front

Or rear use the switch:

Turn button on the rear panel

How to connect a printer to a Windows 10 laptop via USB cable

The latest version of Windows WINTOVS is equipped with built-in configuration tools that significantly reduce the duration of the process and make it clear for beginners. In Windows 7/8, the situation is almost similar.

You need a special cord that does not always come in the kit. Do not forget to clarify this moment from the seller and purchase a cord if necessary.

USB A - USB B

Next, connect the PC with the printer, we turn it on and wait for the system's reaction: a new device in most cases is determined automatically, and if the Internet has the Internet, the driver must be installed without your participation. It takes up to 1 minute.

Unfortunately, it happens that the computer does not see the printer. First, I advise you to restart the laptop, then use another USB port. If you do not help - try to configure manually.

  • Through the Windows search string, we enter the corresponding request;
  • Go to the "Printers / Scanners" parameters section;
  • Click on + to add a new device:

WINDOVS CONTERMENTS 10

  • Dale just follow the instructions of the "Installation Wizard".

If you have a "seven", then just open the "Start" menu and see the desired object there:

Devices and printers in the Start menu

When the list of available external devices opens, on top of the click on the add button and wait until the system finds your equipment.

Add printer button

  • After the development of events are possible: OS itself will select the software on the machine or offer to download it from the Internet (the official site of the manufacturer). You can also insert a complete CD / DVD media into the drive and specify the path to the desired INF file;
  • Restart the PC and enjoy the result.

Important note: Outdated models can be adjusted problematic on new versions of Windows. Displays incompatibility errors. In this case, I advise you to pre-disconnect the printer from the PC, install the drivers and only then connect the printing technique.

If you do not want to look for software, you do not want or do not know how, then I advise you to automatically download topical updates - Iobit Driver Booster:

Connect via wifi.

Everything is extremely simple here. Usually manufacturers give a link to download the application through which it is convenient to configure the wireless mode. Or in the package includes a disk drive (sometimes a flash drive can be with the desired software. It is enough to install it and perform tips.

The second possible option - use the button WPS. on router . But the printing device must also support it (see the characteristics in the instructions or on the developers website).

WPS key

Third way - manual password entry from a wireless network. It is necessary using the buttons and the screen on the technique to enable the search for available networks, then select your list from the list and enter the access code (security key) if it is installed on the router. Here is an example for Epson (to the assistance, menu most often in English):

WiFi Settings on Printer

Here is a useful roller that will help better figure out the topic:

How to connect a printer to a Windows 7 8 10 laptop - I hope figured out. If you have questions, feel difficulties - write, try to consider your situation individually.

How to connect a printer to a laptop without installation disk?

If the user has become a happy owner of a new peripheral device purchased in a hypermarket or online store, is the likelihood that at home he will cope with the connection on the connection. But when a used device is purchased, and the optical media with the software is lost, the question arises how to pair the laptop with the printer. Without the driver, it will not work.

Connect using a USB cable

Consider the options for connecting the printer to a laptop using the USB port depending on the operating system used.

In Mac OS X

Before proceeding to the implementation of the required actions on the connection of office equipment to the Laptop, It is necessary to find out if you can connect a purchased printer to a device running Mac OS X.

To respond to this simple question, it will be enough to open the instructions and read the desired section. Another way is to use the Internet and find out the technical information about the device model.

If in the attached instruction it is written that to attach the office equipment to a laptop with Mac OS X possible, work should be prepared - Put the printing device next to the laptop (USB cable supplied by the manufacturer, usually short).

Besides, A special USB-USB-C adapter may be required, Since USB ports in a number of laptop models running Mac OS X are missing.

To install and connect the peripheral device, you must pair: one end of the cable insert into the printer, and the other to the appropriate gadget socket. Ports are on the side or rear panel of devices. When both devices are properly connected, you should click on the power of the printer with a characteristic icon.

In most cases, the operating system itself finds a printing device. The user will only be offered to install the printer, that is, confirm the installation request. Next, you must follow the instructions of the computer so that the process is completed correctly. The last step is to print a test page.

This will happen if the software you want for the printer is already loaded into the laptop. In most examples, the peripheral device in the pairing process offers to install the driver. If the optical media with software lies on the table - it simplifies the task.

However, such connectivity should be viewed:

  • when there is no installation disk;
  • In the Lapplet model, the drive is not provided by the manufacturer.

In such cases, you need to find the desired driver, what to do is very simple. You must first find out the model of the printing device. It is indicated in the instructions or on the front of the device.

Further - use the search engines: enter the full name of the printer in the address bar and go to the manufacturer's website, where in the appropriate sections relating to software, select the desired driver and download it to your desktop. When the download is completed, the driver will be required by following the proposed steps during the installation process. The final stage is the print page of the test page.

In Windows.

The steps on the connection of office equipment to a laptop running Windows operating system, In general, it is similar and differ only by nuances. First you need to connect both devices with a special USB cable. It is usually supplied with the printing device. Then turn on the printer and laptop to the power grid. It is better to use the power filter to protect the technique from breakdown during voltage drops.

When everything is ready, you need to turn on the power button of the peripheral device. It is located on top, side or rear. After that, the computer must determine the printer and suggest installing software. There are cases that he discovered the device, but to print anything does not work. In this case It is necessary to forcibly install the software.

If the required optical carrier with the driver is present, you should insert a disk into the drive and start the installation file. Installation procedure will be automatically. The user periodically will have to confirm the actions.

When there is no software, it will be as follows, and you can do it on the manufacturer's website manufacturer. Enter the model of the device in the address bar of the browser, go to the appropriate section, download the driver to the desktop and install. You can use special programs for searching and installing software, for example, Driver Booster. In fact, without the user's participation, it will perform the necessary actions.

If the laptop does not see the device, you can try to restart it, connect the USB cable to another port, go to the control panel, where in the "Device and Printers" section, click on the "Install Printer" tab, and then follow the instructions of the installer.

But in any case, the driver installation will be required. . Without downloading software in the operating system, it is impossible to configure printing.

Coupling with electric grid

Laptop and peripheral device Before starting work, you must enable in a network with a voltage of 220 volts. To protect both devices from breakdowns with voltage jumps, It is advisable to use a special power filter.

Such electrical devices are sold separately, cost inexpensively, but are different. Do not save on the network filter, as the reliable operation of the computer and the printer depends on its quality. One of the leaders of this product is considered Pilot devices.

Connect the laptop and printer to the network filter, and it is in the outlet. If required, use the switch. It is located next to the power filter sockets. The same toggle switch can also have office equipment on the back cover. On trying to make settings as described above.

How to connect without wire?

You can use the printer without a special USB cable. This method is suitable if the cord is lost or is no longer suitable for operation. In this case, a wireless connection is performed. Consider how to set up such a pairing.

First you need to make sure that the printing device supports key function. To do this, detect a button with a characteristic Wi-Fi logo. If it is present, it makes sense to start performing further steps.

The easiest way is to use the special application supplied with the peripheral device. After installing the program, you need to follow the advice of the installer. If this is not available, you will have to connect the printer manually.

Another conjugation method is to use the intensive WPS resources. Such a function must support the printer and router. You can learn details from instructions. If the connection via Wi-Fi is real, it is necessary to start further actions according to the following algorithm.

  • Dial in the address bar of the browser 192.168.1.1 or 192.168.0.1.
  • Run in to the router interface, in the Device Pin section and enter the above value - any of the two to choose from. Disable Mac Filter.
  • Press the WPS button on the office equipment. Wait for the Wi-Fi network detection.

The last step - go to the "Printers and Faxes" section through the control panel and put a mark on the default item.

Installation of drivers

After connecting devices - a laptop and printer - a USB cable, the operating system can detect the printing machine, but the printing of documents at this stage will not work yet. You will need to install the driver.

It has the meaning to list the most common ways to search and install software.

  • Independent search by. Enter the full name of the printer to the browser address bar, go to the manufacturer's website and from the corresponding partition to download the desired driver.
  • If the office equipment is present in the list of the OS (you can check the "Computer" path ⇒ "Properties" path ⇒ "Device Manager"), it simplifies the problem. In the list that opens, you need to find a "printer", highlight the string, click right-click and click "Update Driver".
  • Another method, but it does not always work, especially with new printers. Open the "Control Panel", go to the Windows Update Center and update the system.

To configure the peripheral printing device, there is another way. It belongs to the number of the most common and simple, who often uses most office employees. Here you will need to download a third-party application, for example, Driver Genius.

Run the installation file and wait for the process of installing the drivers.

Recommendations

In general, the connection of the printing apparatus to the laptop is reduced to the execution of the three rules:

  • pairing the printer and laptop using a USB cable;
  • installation of software;
  • Print setup.

In order for the peripheral device to work, you must first carefully read the instructions, and only then proceed to sequential steps.

If the printer is an outdated model and is no longer supported by the manufacturer, you can find the necessary software on third-party resources. To simplify the problem, you need to go to the "Device Manager", highlight the "Printer" string.

Next, click "Properties / Details", open the "Description of the Device" drop-down list and select the line of the ED EDD. Copy fully in the browser address bar first or second. Find the desired driver.

If the user bought the office equipment from hand without installation disk (or optical drive forgot to put in the box), you can find the required driver without the help of specialists. It is fairly fair to follow the recommendations described above, after which the printer will definitely earn.

About how to install a printer on a computer without disk, watch the video below.

For the full operation of the printer, you need to install additional software - drivers. Usually, they are included with the device, on a special boot disk. Without them, the computer will not detect the connected device. Of course, we are not talking about devices that are automatically recognized by the system. Immediately I would like to note that you need to read the article completely, since there are complex and simpler methods for installing drivers and therefore you need to read the article to the end. Almost at the very end of the article there is information how to install the driver for the printer automatically, have it insert. When the question arises how to install a printer without a disk, the inexperienced users think that it is very difficult. But in fact, this procedure can be mastered in 15-30 minutes. Let's check if it is.

There are two main ways to install a printer without a boot disk, namely, download the necessary drivers from the Internet

  • Using the basic tools of Windows Update;
  • Alone, knowing the device identification code or using the printer model.

The first method is perfect for simple models of printers (only printing and scanning documents, without additional parameter details), because Windows Update sets the basic driver package.

The second method allows you to download the latest version of software, so after their installation, the user will be available absolutely all the printer functions, including more "advanced".

In addition, the reason for installing the drivers may not only be their complete absence, but also the malfunction of the device itself. Sometimes using one or another printer driver refuses to print documents, and all because the driver you installed did not fit for your device. This is of course one of the reasons why the printer may incorrectly work, but as you understand, we are not in vain about it now. After all, then we will tell you how to download your driver to a computer, but if you hurry, you may have difficulty. Therefore, act in stages.

Installing manual drivers

If you have previously studied this issue somewhere and not one of the ways, it was not crowned with success, you can try to update the drivers. This article is universal - here we will tell how to do in different versions of Windows.

Therefore, before installing a printer without a disc, it is necessary:

1. Disconnect the device connected to the computer;

2. Go to the Start menu - "Control Panel" - "Devices and Printers" or "View Devices and Printers";

Control Panel3. Here it will be necessary to find the "Installing Printer" or "Adding Printer" in the top panel;

Click "Adding Printer"4. The printer installation wizard opens, from the proposed options, select "Add Local Printer" and click "Next" (for Windows 7). If you have Windows 8 or 10, then at the bottom, click "The required printer is missing in the list" - and then select "Add a local or network printer with manually settings" and click "Next".

Click on the link below

Select the last item5. Wizard installation of printers and other equipment will offer to select the port, leave the default settings (LPT1, but in some cases you need to select DOT4_001) and go to the next step;

It is necessary to choose "LPT1" and press "Next"6. Click on the Windows Update Center button and wait for the available drivers available;

Click "Windows Update"7. A list of printer-manufacturers and basic models will be loaded. May take from 5 to 30 minutes. On the left, find the manufacturer, and right specify the printer model. Then click "Next". In this case, we chose the HP brand, and the LaserJet 1022 model.

Select the printer model8. The installation wizard will offer to come up with a name for the device (leave the default name or come up with your own), click "Next";

Printer name

9. Wait for the installation to be completed;

Installing printer10. The "Use of General Parameters" window will open, here you need to select the "No sharing to this printer" parameter and click "Next" (window will appear if Windows 7 is installed). If you have Windows 10, then you will display the window where you want to click "Finish" (the same window will appear later in Windows 7).

Printer installation ended

The next thing to do is to delete the device just installed. To do this, click on the printer icon with the right mouse button and in the context menu, select "Delete the device" (while the installed drivers will remain).

Deleting printer

After the proceeds have done, you can connect the printer to the computer. When connecting the printer, you need to wait a bit to make the computer automatically recognize the printer and installed. Then you can print any document to make sure the driver is installed.

How to do it in Windows 7:

Official sites

If you do not have a drive with drivers for the printer, you can download them from the manufacturer's official website. For this, it is enough to know the company and the model of the printer. You can find them in the documentation, on the housing or rear of the device. If you do not understand the instructions below, you can download the desired driver on our website without any fears (all drivers without viruses).

Open any browser and in the search bar, enter: "HP LaserJet P1102 Printer Driver Download". In this article I will search for the drivers for the above device, you also need to specify your model.

Search driver in Google

As a rule, the reference to the official website of the developer will be on the first search page, in the top. But it does not always happen and therefore it is necessary to be attentive. In order not to download malware instead of drivers, make sure you really went to the official developer website. To do this, pay attention to the site link in the search engine. There should be nothing "superfluous" (the address will be approximately: "hp.com" or "samsung.com", etc.

If you doubt the authenticity of the site you found, you can only enter the name of the printer without a model and other information. And from the main page, go to the "Drivers and Other PO" section.

Search for the desired site

Advantages of downloading drivers from the official site:

  1. Security (availability of digital signatures for drivers, lack of built-in malicious code);
  2. The developer places on the site only the last, "Fresh" versions of the drivers.

As soon as you get to the desired page ("Drivers and other files", "software", "software", "download", as well as "Drivers" on the English version of the site), you will remain to enter the model of your printer and search.

Driver search on HP

In addition, some sites allow you to automatically determine the device model and the necessary drivers, for example, can be the "Define Product" button. So, if we are on the HP website, click "Search for Product" and in our case there are varieties of this model. We need to choose the desired model by pressing the left mouse button.

Different models of printers

After you have the necessary drivers, you will need to specify information about the version of your operating system, the system's discharge. If this window does not appear, then simply click on the link or the button for downloading drivers.

Download drivers on HP

There may be such a situation that the site will offer to download the version of the drivers to choose from:

  1. Basic - to access the main possibilities of the device;
  2. Extended - to access additional features.

You do not need to experience what version you download, the main thing is to specify the correctness of your system (discussed above).

The installation package of the driver will begin:

Download Driver

At the end of the download, you need to run the downloaded file and follow the instructions of the installation wizard.

Windows Update.

The Windows operating system by default contains all the main drivers for the most popular peripheral devices. Including printers and scanners. To do this, connect the device to the computer and wait a few minutes. If an attempt to automatically install the printer is not positive, you must do the following:

1. Open the control panel;

2. Find "Equipment and Sound";

Click "Equipment and Sound"3. Click the left mouse button on "Devices and Printers";

Devices and printers4. A new window will appear with icons connected. Find the image of the computer or laptop (in my case it is a laptop) and click on it with the right mouse button. In the context menu that opens, click on the window "Windows Update".

Click "Windows Update"

5. After that, a window will open, where in the right menu you must click "Checking the availability of updates". There should be automatic search for available updates for all your devices. We must tell you that it is desirable to have a quick Internet, as this procedure can take 10-30 minutes.

checking for updates6. Now you have to wait, when Windows is downloaded by the found updates in automatic mode;

Downloading updates7. After the search is completed and all the updates found will be downloaded and installed on your computer or laptop, you must restart the device.

After rebooting the computer, the printer must work. If, after rebooting the computer still does not see the device, perhaps the root of the problem is not in the drivers. Try connecting the printer to another USB input.

Definition of printer ID

Each device that connects to a computer belongs to a unique identification code. If you know the equipment ID, then you download the driver you need without any problems. If the instructions described above did not help you, and you did not figure it out, how to install a printer without a disk , It is necessary to know its identification code. I recommend this option to use in the most extreme cases, and if you downloaded the drivers from the official site, you can skip this option.

So, to learn ID:

1. Right-click on the computer and select "Properties", following the left, press "Device Manager";

Computer properties

On the left, click "Device Manager"2. In the window that opens, find your printer. Right-click on the desired row and in the menu that appears, click on "Properties";

Device properties3. A dialog box opens where you need to go to the "Details" tab. Next, in the "Property" line, select "EU ID".

Device ID4. The window below will appear, which will be the identification code of the printer (if there are several values, then select the first one);

5. Copy the identifier. Go to the official website of the manufacturer of your printer and enter a copied identification number to the search. You can also use the search engines to find the driver you need using the equipment ID. But does not forget that on our site there are all drivers for existing printers. It remains only to download the driver found.

Remember that downloading drivers only with official resources. This is absolutely free and most securely as possible.

Install drivers automatically

That this problem never bothered and drivers for any external devices installed automatically, it suffices to change the basic Windows settings. For this:

1. Go back to the "Devices and Printers" menu (described above, how to log in here) via the control panel. Right-click on the "Computer" icon and in the context menu that appears, select "Device Settings";

Device installation parameters2. The dialog box opens where you need to select "Yes (recommended)" (recommended default parameters) and click "Save";

Leave by default

Now, after connecting the new Windows device, you will automatically search and install the necessary drivers from your own database or using the Internet connection.

The sad situation when your printing device turns out to be without a drive with drivers or if there is no drive in the PC. In this article we will tell you how to install the printer in this case. Without installation disk, it is more difficult to do this, but really even for a regular user.

There is no special difference - you want to connect to a laptop or install on a computer, all the actions for connecting the printer will be identical. In fact, the solution to the problem rests on the ability to install the driver. How to do this procedure. We will consider on the example of Windows 7 and models of HP, Canon firms and others.

Manual installation

The easiest way to add a local printer to the computer will install its drivers manually.

Before starting all actions, it is necessary to break the physical connection between the printing device and the PC created by the USB cable.

If you have a Windows operating system installed, then the procedure should be:

1. Go to the "Devices and Printers" section. To do this, click the Start button and on the right, select "Devices and Printers".

If you have installed WIN10, then the order of login to the "control panel" is described in this subsection of this article.

2. In the window that opened, look for a new printer button. Depending on the version of your Windows, its name may differ slightly.

3. Click on the "Installing Printer" button at the top of the left. In the next window, select "Add Local Printer".

4. In the port selection window, do not make any changes. We leave the LPT port and click "Next".

5. In the opened window on the left, select the manufacturer of your device. After that, the choice of models will be available on the right. Among them should find the desired model.

If your device model is not in the list on the left, then click the Windows Update Center button to download missing devices.

6. After selecting the desired printer from the list, click "Next" and change its name if necessary.

After that, the process of installing software will start. At the end, it will be necessary to have a slight setting.

7. Total access to the installed printing device is configured at this step.

In cases of using a printer for printing over a network from other computers or laptops, you should not change the common print settings. But if we are talking about a home apparatus, then the provision of network access does not make sense.

8. Oddly enough, but further action will delete this device from the list in the "Devices and Printers" window. Select it, right-click from the menu that will appear, select Delete Device.

9. Connect, previously disconnected cable. We are waiting for a little time and print from a computer or laptop should work.

Download drivers

If the above option is not obtained, the download is worth trying to perform directly through the official website of the product manufacturer.

Do not download drivers from third-party resources, no matter how reliable they are. There is always a threat to infect your laptop viruses or malicious software.

Depending on the manufacturer of your printing device, use the links below:

  • HP.
  • Canon
  • Dell.
  • Epson.
  • Lexmark.
  • Samsung
  • Xerox.
  • Brother.

But it will be more convenient and faster using our driver selection service.

We will look at downloading drivers directly by the example of Canon devices.

1. Go by reference http://software.canon-europe.com/ .

2. Next, you need to find your device according to the exact name of its model. Enter its name in the search string.

3. The manufacturer's official website offers to select different software versions for Windows system.

As a rule, your version of the OS will be determined automatically, which you will be notified by the inscription "Operating System Detected". Do not change these selected default parameters. It remains only to choose the driver's language from the list left.

4. Click on the "download" button.

You can find the downloaded file in the "Downloads" section of the browser. To enter this section, press CTRL + J key combination.

Windows Update.

Windows Updates can also help install drivers per printer when there is no disk to it. The modern operating systems of the Windows family system, such as Windows 7,8110, have a "sewn" database with drivers not only for printing devices, but also for other equipment.

If the model of your device is new or not very popular, then the drivers in the Windows database may not be. In this case, it is necessary to make a compulsory update through the Windows Update service. How fast and easy to do this look in the instructions below.

Procedure for WIN10. Click to view.

1. Open the personal control panel. Regardless of the device, everything is similar to both if Windows 10 is installed. Press the Run Mouse button on the Start button, from the drop-down menu, select "Run".

2. In the window that opened, type "Control".

3. In the Control Panel, open the "Devices and Printers" section.

4. Find your PC among devices.

5. Open the menu by pressing the right key and select "Windows Update".

6. Click on "Checking the availability of updates". If the system finds any update packages, then install them.

Instructions for win7. Click to see.

Actions to update through the UPDATE service for the seven.

1. Click "Start" and enter "Update" in the search bar. Select "Check updates".

2. Check the availability of updates and set the found.

After rebooting the PC, Windows must "see" a new device and install just downloaded drivers. If this did not happen, then the driver may not be in the Microsoft base. We recommend using other ways to connect. You can find them below on the page.

Automatic installation

For a family of Windows operating systems, automatic loading of drivers is possible for any device connected to a personal computer. When performing certain settings, all the files need to be downloaded to the computer themselves.

To do this, you need to do several simple actions:

1. Go to the "Devices and Printers" section (how to do this is described in the same article above). Among the devices, select your PC or laptop. Press the right mouse button on it. Find the Device Settings item.

2. Mark the string "Yes (recommended)" and save.

How to find out the printer id

Another working way for downloading drivers is an option using a unique equipment identifier. Each model has its own unique ID. By this code, you can try to search for suitable software.

Instructions for definition ID:

1. Click "Start" and find the "My Computer" icon. Right-click and select the "Management" section. Look in the picture below.

2. Open the Device Manager, and Run the Other Devices item on the right. If a PC or laptop sees a printer, then it will be listed. Press the right on it and you need to select "Properties".

3. In the window that opens, go to the "Details" tab. In the properties from the drop-down list, click on "Equipment Education".

4. After you see the information you need. According to the received identifier, you can easily find drivers through a network search or on the manufacturer's website.

Installing a driver from another printer

This option can be safely attributed to the "exotic" category. It would seem how can the driver from another model come up. But in case the versions of firmware and software in both printers are identical or these devices are representatives of the same series, then this method can also help you.

The following steps are:

  1. Find out the exact model of the printer connected to the PC or laptop.
  2. Open the manufacturer's website Enter the model in the search model and in the description of the model you can find information about the series to which it belongs.
  3. Learn what other models belong to this series.
  4. Install the drivers of any printer series on your computer any of the methods described above.
  5. Try typing any document.
  6. Fine!

    In gratefulness, tell us about the article to your friends and acquaintances in social networks. Use the buttons on the left or bottom of the page. It does not take more than 15 seconds. Thank!

Can I connect the printer to a laptop

Theoretically, the laptop differs from the "big brother" only the presence of a battery, compact sizes and, in most cases, the inability to expand the device by installing new modules. Since the Times of the Special LPT port have been riveted in the fly, all modern models can be connected via USB, Wi-Fi or Bluetooth. And any laptop is now difficult to submit without these interfaces.

It is worth noting one interesting feature of almost all manufacturers of printing devices. The kit is always there is no USB cable. How to explain this multi-year riddle does not know, apparently, no one. Therefore, before attaching the device to a laptop, make sure that the cable is available.

USB cable

USB cable connect printer to laptop

USB cable

Main ways to connect

Considering the entire array of devices on the market, there are only three main ways with which you can connect the device and a laptop:

  1. USB . The usual connection using the standard USB cable is USB "B". The most common way.
  2. Wi-Fi . A rare mobile computer is not equipped with a Wi-Fi module, so connect the device without wires is easier than simple.
  3. Bluetooth . It is most likely optional than on an ongoing basis, since there is always Wi-Fi. But also meets in modern models.

Let's figure out how the connection between each type occurs.

Connecting a printer via Wi-Fi

Before connecting the printer to a laptop via Wi-Fi, you need to familiarize yourself with several main ways:

  • with installation of drivers;
  • via WPS;
  • manually;
  • Connect to a router via USB.

The usual connection starts with the installation of drivers. Usually they are included on the disk. If not, you can always download from the official site. In the installation process, a section must meet, which is responsible for the method. It is here that you need to specify a wireless connection. After the installation is completed, you will have to connect the machine with a PC via USB for a while. The system must automatically determine the new device and suggest select the settings. Here you will need to specify the network to which you want to connect and password to it. After the settings are completed, you can disconnect the USB cable and try printing the first trial document.

Router must also support WPS

Router must also support WPS

If the router and the printing device support WPS, then before connecting the printer via wi-fi, just press the WPS button on both devices and they can connect.

Using WPS is not absolutely safe, as the technology is vulnerable and with proper perseverance, the attacker will be able to find the desired key.

Using WPS.

Manual setting is the safest way. It is more relevant for models with its own system settings on board and display. Right from the control panel, you need to connect to the desired network and enter the password. Then install drivers and software from the computer. Using software you need to configure a wireless connection.

Routers equipped with your own USB port can use direct connection and share it in a shared network. There is nothing complicated here too. After connecting the devices, you need to go to the web interface of the router and check if the device was determined. Then from the operating system you need to add a new printer over the network, "rain" him drivers and print the start page.

USB

This method is so simple that it can be described literally in 4 simple steps:

  • connect the device and PC cable;

Connect the printer to a laptop connection via cable

Cable connection

Before installing, you need to turn on the printer and laptop

Before installing, you need to turn on the printer and laptop

  • Install drivers from disk or downloaded from the Internet;

Window Installation Wizard

Window Installation Wizard

  • Print a test page.

Test page of inkjet MFP

Test page of inkjet MFP

How to connect a printer without a wire to laptop - Bluetooth

Bluetooth is mainly present on modern models as an additional option. Therefore, it is used extremely rare. Most often, this function is used to control the smartphone or tablet.

How to connect printer to laptop

Compact device for printing checks with Bluetooth with smartphone

In general, the entire connection process is not much different from connecting any other device. The printer turns on Bluetooth, on a laptop too. Then, when the system finds the device among affordable, you just need to attach it. Installed the necessary drivers and the device is ready to work.

Software installation methods

In order for the operating system to know how to work properly with new equipment connected to it, a set of special instructions - drivers. For each device, they are unique. Sometimes developers can use one common driver into several devices.

Thus, the driver is a certain adapter with which the system controls the device. The software is understood as drivers and additional software. As a rule, it serves to facilitate the work of the user, calibration, settings and testing the device. You can use the machine without drivers (as a forced temporary measure) before the disk is found or drivers will be downloaded. Consider ways of connecting with drivers and without.

Install drivers from disk or internet

In the first case, everything is simple - you need to load the disc in the CD tray and go through the proposed steps of the installation wizard. It is worth noting that modern models are recommended to connect after installation of drivers. Although, in most cases, everything works and so. It is difficult when the disk with ready-made "firewood" is not. Then one way remains - the Internet.

Download drivers need from an official site. First, there are always the most recent versions. And secondly, it will be secure from viruses. If the situation is hopeless and the driver is needed, then when loading it from a third-party site is better to "walk" by it by antivirus.

Install drivers from disk or internet

Next can be two ways: the driver has its own installer or not. In the first case, it is enough to start the installation file. But in the second you will need to first go to the "Device Manager" program, which is in the "Toolbar" program. Among the list of equipment, we find something that has not been determined after the connection, and click on it right-click. Then select "Update Drivers" item. In the window that appears, you need to select the installation of drivers from this computer. Next, specify the path to the downloaded file. By the way, the system can also offer to search for drivers after the connection.

How to connect printer to laptop without installation disk

Sometimes the installation of the drivers is impossible due to the loss of the disc or for any other reasons. In principle, our device can "start" and without drivers, really not always. For this procedure, you first need to connect it to a laptop using a cable. Then you need to get to the system control panel.

Control Panel in Windows 7

Control Panel in Windows 7

Here we are interested in the item "Devices and printers", in which you want to select the installation.

Installing a new device

Installing a new device

At this stage, you can select the type of connection - network, wireless, Bluetooth or local. We consider the connection through the cable, that is, local, so you need to specify the port from the list, select the manufacturer and the name of the model. In the next step, you can specify the name on which it will appeal to it. In theory, after clicking on the "Finish" button, everything should earn. If not, you will have to search for a driver on the web and download it.

Differences in connected in various OS

On the market of operating systems, you can find three main directions: Linux distributions, Windows Series and MacOS series. Each of them, in turn, is divided into different versions and releases, installation on a laptop in which may differ. Let's figure out how this process is happening in different systems.

How to connect a printer to a laptop on windows 7

The operating systems of the Windows family systems are very widespread among users. It is the simplicity of installation and handling of the system greatly influenced this. The same applies to the printer. Very often, when it is connected, the driver can "catch" themselves and the device will immediately be ready for use.

Windows 7 desktop

Windows 7 desktop

If the automatic installation failed, then insert the disk and install it from it. If it is not, then you need to go to "devices and printers". This item in Windows 7 may be immediately in the Start menu. From above, the window that opened should be the "Installation" button. After clicking on it, a new dialog will appear, which will be offered to choose the type of connection. If you need to do this with USB, select local if other methods are the second item. Next, you need to either choose a well-known system model from the list, or install from the Windows Update Center. The second method helps extremely rarely, so we choose the finished driver from the list. Then write the name of the device, if necessary - select network access. This can be considered the installation completed.

How to connect a printer to a laptop on Windows 10

In the Windows 10 operating system, several changes were made to the interface. Therefore, the installation of devices in it is slightly different. In particular, adding a new device is made not through the "Control Panel", but through the "Parameters" in the "Start" menu. Next, you need to go to "Devices" and find "Printers and Scanners" here. To add a new device to click "Add Printer or Scanner". Next, similarly to Windows 7, the model, name, access and everything is saved.

Appearance Windows 10

Appearance Windows 10

Installation on Macos.

Almost on all versions of MacOS, this process occurs equally. To begin with, physically connect both devices with a USB cable. You will also need the drivers for the right job. You can download them on the official website of the manufacturer or disc included. Although the software for Mac on printer disks is quite rare.

Mac Os.

Mac Os.

Then you need to find "System Settings" in the Dock panel. Further go to "Printers and Scanners". In a new window, click on the "Plus" to add and select your device from the list.

How to install on ubuntu

This is probably the most interesting connection. It is worth starting long before buying a printer, since Ubuntu does not support all devices. It will be necessary to make sure the manufacturer's website, whether drivers are present to a specific device for Ubuntu. Then you need to additionally search for information about successful launches from other users.

Ubuntu.

Ubuntu.

After you have seen that everything you need, you need to find an instruction how to establish a specific brand, since methods and options are different. One will have to change configuration files, in another - just set a pair of applications from the repository. It is possible to find common useful tips and instructions for the most famous brands here - http://help.ubuntu.ru/wiki/printers_scain_mf.

Connection instructions for models of various manufacturers

In general, the installation of different manufacturers is not much different, but still it is worth showing the example of several well-known brands, as it is. Take the devices from Canon, HP, Brother.

How to connect a canon printer to a laptop

Regardless of the type of device (laser, inkjet or MFP), before turning on, you need to make sure that all protective stickers are removed. Well, then everything is in order:

  1. Install the drivers from the disk or download them from the network.
  2. Connect the machine with a computer using USB.
  3. We are waiting until the device is determined by the system.
  4. Print the test page.

Canon MG3640.

Canon MG3640.

If the disk is absent, you can try the technique described slightly higher in the article.

How to connect the hp printer to laptop

A large number of HP devices can be installed using drivers embedded in Windows 7, 8, 10 systems. For example, you can perform several simple steps for Windows 10:

  1. In the search you need to drive the phrase "Change device installation options" and click on the result.
  2. In the window you need to specify "automatically" and save.
  3. Connect the printer to the computer.
  4. Go to "Devices and Printers".
  5. Click "Add Printer".
  6. In the list, select your model and click "Next".
  7. The device must be successfully established.

HP 2529.

HP 2529.

How to connect Brother printer to laptop

To connect the model from Brother, you can (following the official management) Run items:

  1. Install the cartridge, remove all protective stickers.
  2. Install drivers from the included disc.
  3. During installation, the system will ask to connect the machine to the computer.
  4. After completing clicking "ready."

Brother HL-1110R

Brother HL-1110R

This is how easy it is to install and connect.

How to connect MFP to laptop

MFP is multifunctional devices that can perform several functions - print, scan and copy. The system should know how to work with a printer, and with a scanner, so the driver set is very different from standard devices.

How to connect MFP to computer via Wi-Fi

You can do this in several ways. Before connecting MFP to a laptop via Wi-Fi, you can briefly familiarize yourself with them:

  • Direct connection Using the control panel of the device itself. It is enough to connect to the Wi-Fi network, install the drivers to the computer and find it in the list of available network devices;
  • Connection using WPS. Very fast way. You just need to press the WPS buttons on the MFP and the router, and everything will be connected by itself.

The MFP is usually equipped with its own autonomous control unit, with which you can configure many parameters. This is the number of copies, their quality, cancel the current task and connecting to the wireless network. New developers are trying to maintain relevant for the present time and equip them with new-fashioned WPS.

If you know interesting ways to connect the printer to a laptop on Wi-Fi, USB or Bluetooth from your personal experience, then share them in the comments.

Leave a Reply

Close